Paul Components Racer M Brake
ID: 381
SKU: 342 -150
LOC: I3
Reg. $145.99
Option:
select

Choose Option From Dropdown

Qty:
Submit Price Match
This product qualifies for free shipping in USA and 50% Shipping Discount outside USA.
Save this to a Bike Project List - Log In or Register.

Following on the heels of the successful Racer is the leaner, meaner, racier Racer Medium. It's got fantastic stopping power and thanks to the very stiff and short arms it modulates that power better than any brake we've ever used. The Racer Medium is offered in both a center mount and a braze on configuration.

The Center Mount version features an additional bridge piece that runs between the pivots and allows the Racer Medium to mount to frames with a single brake mounting hole above the tire. The option is given for a shorter recessed bolt to work with modern frames, or a longer non-recessed bolt that works with older frames. In this setup the Racer Medium is a medium (or "standard") reach brake with a range of 47 to 57mm.

The Racer Medium come with all necessary hardware: mounting bolts, straddle wires, and cable carriers. Black or silver anodization is available, along with a high polish finish.

Between the arms there is enough clearance to fit a 45mm fender and a 32mm tire. We think this is a perfect combination for an all-around-do-everything road bike if there ever was one. As a bonus, the brake will not pinch the side of the fender like dual pivot brakes do.

Tech Info:

Material: 6061 Aluminum
Weight (w/o pads):
Center Mount 154g/wheel
Finish: Anodized or High Polish
Anodized Color: Black
Cable Pull: Short Pull
Reach:
(measured center mount bolt to pad)
47mm - 57mm
Instructions: racerm.pdf