The Funky Monkey Front is a simple hanging cable stop for front centerpull and cantilever brakes.<p>Three clamp sizes are available to work with threaded or threadless headsets. The 1 1/8" Funky Monkey works great with threadless headsets, clamping to the steerer tube between the stem and upper headset bearing. The 7/8" version clamps onto the lower portion of quill stems installed in threaded headsets, and the 1" inch version can clamp to 1" threadless steerer tubes or 1" quill stems.</p><p>The extra long arm drops down to prevent brake cable housing from bending too tightly and binding up, and the arm sticks out far enough to clear most headsets. A barrel adjuster is included to make front brake cable adjustments quick and painless.</p><p>Tech Info:<br />Material: 6061 Aluminum<br />Weight: 29g<br />Finish: Anodized<br />Anodized Color: Silver<br />Clamp Diameter: 1"<br />Stack Height: 11 mm<br />Instructions: See- http://paulcomp.com/fmfront.html</p>