Paul Components Racer M Brake 342-148

Following on the heels of the successful Racer is the leaner,meaner, racier Racer Medium. It's gotfantastic stopping power and thanks to the very stiff and short arms itmodulates that power better than any brake we've ever used. The RacerMedium is offered in both a center mount and a braze on configuration.

The Center Mount versionfeatures an additional bridge piece that runs between the pivots andallows the Racer Medium to mount to frames with a single brake mountinghole above the tire. The option is given for a shorter recessedbolt to work with modern frames, or a longer non-recessedbolt that works with older frames. In this setup the Racer Medium is a medium(or "standard") reach brake with a range of 47 to 57mm.

The Racer Medium come with all necessary hardware: mountingbolts, straddle wires, and cable carriers. Black or silver anodizationis available, along with a high polish finish.

Between the arms there is enough clearance tofit a 45mm fender and a 32mm tire. We think this is aperfect combination for an all-around-do-everything road bike if thereever was one. As a bonus, the brake will not pinch the side of thefender like dual pivot brakes do.

Tech Info:

Material:	6061 Aluminum
Weight (w/o pads):	Center Mount 154g/wheel
Finish:	Anodized or High Polish
Anodized Color:	Black
Cable Pull:	Short Pull
Reach: (measured center mount bolt to pad)	47mm - 57mm
Instructions:	racerm.pdf